[vic]

Вот и пару скринов с польского форума..

Сообщение от zbigzbig20

Pierwsze wydanie E2 dla UFS910. Image do zbootowania z NFS. Nie jest to mуj soft i go nie testowałem ponieważ nie posiadam kathrein. Acha, image to nie obsługuje obecnych wersji emu pod 910s. Wiec narazie tylko kanały FTA można oglądać

A tu pare screenуw:













Soft do pobrania na Upie: [Только зарегистрированные пользователи могут видеть ссылки. Регистрация!]

Вкратце..софт не работает с эму..

Добавлено через 11 минут
Вот ещё инфа..кто силён в языках--переведите плисс..

thx to my friend humlan

---




Duck Tales Enigma2 for Kathrein UFS910
team DuckTales proudly presents the first enigma2 alpha image for Kathrein UFS-910.
This image should be seen as a proof of concept - there are many bugs and some hardware
which is not supported at the moment. If you are a developer, and you have experience in
(embedded)hardware/linux-dvb-api coding feel free to contact us - you're welcome!

To test this enigma2 image you need a running nfs server and a serial & network
connection to the receiver.

1. extract the tgz file on the server and set the directory in /etc/exports
for example:
/nfs/target_enigma2 192.168.0.0/24(rw,no_root_squash,sync,no_subtree_check)

2. restart nfs server

3. connect via serial console to the receiver

4. turn on the receiver and hit enter in serial console
you should see the following prompt:

Hit any *** to stop autoboot: 0
STB7100-REF>

5. customize the follwoing settings to your network environment and type them into the
serial console (without the doublequotes):

"set ipaddr '192.168.0.25'"
"set serverip '192.168.0.1'"
"set gateway '192.168.0.1'"

7. to set the bootargs also type:

"set bootargs 'console=ttyAS0,115200 root=/dev/nfs nfsroot=/nfs/target_enigma2 rw ip={$ipaddr}:{$serverip}:{$gateway}:255.255.255.0: kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 nwhwconf=device:eth0,hwaddr:${ethaddr}'"
"setenv bootcmd 'nfs a5000000 {$serverip}:/nfs/target_enigma2/boot/uImage;bootm a5000000'"

where /nfs/target_enigma2 is the directory you added to /etc/exports

8. to save the settings type "saveenv"

9. simply type "boot" or restart the receiver with the power-switch. now enigma2 should boot.


greetings from team DuckTales
ONLY devs can contact us at team_ducktales@hushmail.com

Пока не работает в имидже:

- emu
- ci
- record/playback
- неверно fernsehen/zappen